Protecting Your Workers From Accidental Electrocution

You want your workers to be safe and protected from accidental death, but electrocution remains a potent danger in many industries. This might be hard to believe, but it's true. Protecting your workers requires that you understand the causes of electrocution and how you can avoid it.

Electrocutions Remain A Major On-Site Problem

Electrocutions are among the top four work-related deaths in the country. They are typically the second most serious danger and account for about eight to 10 percent of all work-related deaths in the country. This problem is especially prominent in industries that work heavily with electricity, such as power line workers, tree-removal technicians, and many others.

The Causes Of Electrocution

Electrocution is usually fatal in the workplace. It can occur in any number of ways. For example, an extension cord may have severe frays that, when touched, cause an excessive amount of electricity to pass through your worker. Other problems include overloading electrical outlets and transformers.

Another problem is proximity to power lines. If your work site is near power lines and your workers aren't used to being near them, there's a chance they won't take the proper safety precautions necessary to avoid electrocution and death.

How To Avoid This Safety Concern

Keeping your workers safe from electrical dangers requires understanding where these dangers originate and what you can do to prevent them from happening. Just a few ways that you can help keep your workers safe from electrical dangers include the following simple steps:

  • Inspect all electric equipment at the beginning of the workday, including power cords
  • Tape extension cords down to avoid tripping dangers
  • Touch-test outlets form warmth – if hot to the touch, avoid using them and get them inspected by an electrician right away
  • Replace frayed electrical wires – taping them only delays the inevitable
  • Always know where the circuit breakers are in case of an emergency
  • Close all electrical boxes to avoid accidental exposure
  • Plug up non-used outlets with small plastic plugs
  • Position you work site as far as you can from power lines

Other steps include training all of your workers on the safety guidelines put in place by OSHA. These guidelines are a necessary tool for preventing burns, electrocutions, shocks, and other serious electricity-related dangers.

If you're worried that your work site is suffering from many of these problems, please reach out to a safety consultant, such as those found at CSP Consulting Services LLC. They will inspect your site, find electrical dangers, and help you decide on solutions that will eliminate the danger.


Share